How to solved MB SD C4 "Device not in use" error Solution

How to Connect the SD Connect C4 multiplexer to Dell 360 running XP by using the external software HDD with VMware player, the multiplexer displaying “Device not in use” error message.
Symptom/ Attempt:

The MB SD C4 main unit green light illuminated. When try to connect the C4 to laptop with diagnostic cable, there was no connection. The SD card slot was empty. When connect through wireless communication, no WLAN on the external software HDD.

The “Device not in use” error may due to the following three reasons:

1 The link between the diagnosis multiplexer and the diagnostic socket is interrupted.
2 The link between the diagnosis multiplexer and the diagnostic unit is interrupted
3 The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 32) is faulty

Please seek help to mbstarshop technical support. The commom reason is on account of the third reason.

Solution:

Because MB SDConnect C4 is using static IP address to carry out wireless diagnosis, so users please reset the IP address in Windows XP network connection.

Result:

The SD icon showed number 5 with an open padlock. Xentry and DAS software worked well immediately. Go so far as to multiplexer took me more time to display nice.

How To Used Lonsdor K518 Program Mini Cooper CAS3+ Remote Smart Key by OBD

Here’s the guide to program remote smart keys on a Mini Cooper CAS3+ immobilizer with Lonsdor K518 key programmer via OBD.

Connect K518 host with vehicle via OBD socket
Turn on device
Select Immobilizer function on main menu

Select BMW->Select from type->CAS2/CAS3 series->Program Key

Will start to make dealer key

Insert key into card slot and press on Start button once

Lonsdor K518 ISE key programmer will display CAS part number and type.

Reading RAM… wait for 1 minute

Remove key from ignition switch.
For smart eym take it outside car.
Click OK to continue

Safety checking

Reading key inforamtion

Select a key position to program

If car key has been programmed but failed, please unlock the key and restore CAS data first

Press OK to continue

Select Remote Key

Pull Lonsdor K518 Auto Key Programmer key slot to the right and insert the key to program (to identify if the key is legal and to pre-process key)

Detecting key…

Current key is legal

Writing key inforamation…

Insert the key generated into card slot for 5 sec

If vehicle cannot start, or direction lock shows on the dashboard, please synch ELV or DME accordingly.

Writing key information completed.

Test the new key.

http://www.fobdii.com/wholesale-780-lonsdor-k518ise-key-programmer.html

CGDI Pro Mercedes Benz Programmer all key lost OK review

CGDI Pro Mercedes Benz Programmer review on what works, very nice CGDI MB tool 

How To used MB SD C4 Do Offline Programming for Mercedes W164 Front SAM

One of customers sent an email to fobdii.com customer to report he has a question that no option to program the SAM using offline programming with MB SD Connect C4 multiplexer and Xentry 09/2017 fail to do. Here is the  solution provided by our technician.

2005 ML350 4Matic

MB SD C4+ Dell D630 laptop+ 2017.09V DAS/Xentry

Problems Description:
Problem one: Problem with the front SAM, when select Yes the next screen goes to online programming. There is no option to program the SAM using offline programming. At least I couldn’t find it. The starter doesn’t even crank.

Problem two: Secondary problem is the ISM. The original module generated a message on display: “Drive to workshop without changing gear”. The transmission now is stuck in Park. I installed another identical module from another ML350 and the message is gone but there is no reaction when changing the shifter from park to other positions. I get a message to depress the brake even when the brake pedal is depressed.
Also, when I go to the Developer option I get the message the file is missing, see photo. So, I have two serious problems to deal with. I’m looking forward to your feedback.

fobdii.com Engineers reply and solution way：

Please can not use ISM from other car,..use brand new,..marry it to the vehicle and you will probably start the engine.
Then program front sam online,..or if you don’t have online access,..pass this step,..it has program inside it generally.///code it manually according your car,..and if still has SAM errors,..probably could change it with new one!
Neither ISM neither SAM need online or offline,..they always can be initially startup manually with DAS

As for the question “I don’t know why when I accessed the front SAM with DAS it gave me a message saying that the SAM needs to be programmed. See the attached photos. It is not my imagination. This is what I got when trying to read the fault codes from the front SAM.”
I guess: probably your sam is almost dead.//put other one used..or new one

Yanhua BMW FEM BDC key programmer read write engine ISN

OBD read write BMW FEM /BDC engine ISN on most N20, N13, N55 is possible with Yanhua BMW FEM /BDC key programmer V1.0.5.

Yanhua BMW FEM Auto Key Programmer , online update, support offline operate, safe and stable, easy to operate, support latest FEM vehicles till 2017

Guide: Yanhua BMW FEM / BDC V1.0.5 read write engine ISN via OBD

Click on “Connect” then “OBD read / write engine ISN”

Executing read DME ISN code…and then read out version

Pops up “ISN – DME/DDE [MEVD1725_N13]” and “Execute read DME ISN code success”.

Click on “Write” to have new DME ISN code and wait until writing succeed, click on “Close”.

One more time, click on “OBD read / write engine ISN” to read out the new ISN code, wait until you see the message “Execute read DME ISN code success”

Done!

Yanhua BMW-FEM/BDC V1.0.5 read and write DME ISN code succeed.

http://www.fobdii.com/wholesale-509-yanhua-bmw-fem-key-programmer.html