roulinn520

laptop keyboard

roulinn520

laptop keyboard

How to used Tech2 scanner turn off SAAB day running lights ?

I have got a clone GM tech2 after hearing it is less than $500 and is able to do diagnosis and coding. Used it to reset day running light on my 2004 SAAB the other day. Worked as it should be. I saw some forum members are looking for a way to complete turn off the DRLs and would like to share a simple guide about this with the Tech 2 scanner.

GM Tech2 scanner Features:

1) GM software in the Tech2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
GM Tech2 scanner
Tools you will need:

GM Tech2 scanner for GM and SAAB
32MB PCMCIA Card for Tech2
A SAAB car (Here take my daughters 2004 SAAB for example)

How to:

Hook up GM Tech2 scan tool to the OBD2 port in your car. The scanner does not need software installation and can be used directly after connecting it to your car.

Insert 32MB card into Tech2
Run Tech2 diagnostic tool
Go to Diagnostic Mode
Select Diag >2003 >9-3 Sport Select Body>Exterior Lighting and Horn
Low beam adjustments
F0. Auto Low Beam also in Pos 0
Change setting to NO
Wait several seconds until the lights flicker and go out
Exit
Go to Fog Lights Front
Change to Position 1 & 2 ROW (Rest of World) Program and click Exit when finished.

After the programming, you will get:

Pos 0 > No Lights
Pos1 > Fogs and 5 Watt Headlamp / Parking Light
Pos3 > Low Beam, High Beam, Manual Control of Fogs

This process takes about 5 minutes. You can also turn the lights on following this process.

http://www.fobdii.com/wholesale-2-gm-tech2-in-carton-package.html